Add To Your WishlistWindstorm 615 BHP (5855X/XR) - Dual Ceramic Ball Bearing Performance Turbocharger
Add To Your WishlistWindstorm 615 BHP (5855X/XR) - Dual Ceramic Ball Bearing Performance Turbocharger
for estimated delivery on
Sorry we're out of stock!
We can let you know when it's available again, just enter your email address below.
Click here to recommend this product to a friend
Windstorm 615 BHP (5855X/XR) - Dual Ceramic Ball Bearing Performance Turbocharger
- Description
Windstorm 615 Turbocharger
(NOTE: CURRENT BUILD TIMES ARE TYPICALLY 5-7 WORKING DAYS)
Compressor Wheel– CNC Machined 2618 Billet Alloy (Rated 5 Bar (70psi)
Compressor Wheel Inducer: 58MM
Compressor Wheel Exducer: 76MM
Compressor Wheel Trim: 58
Compressor Housing A/R: 60
Compressor Housing Inlet: 100MM
Compressor Housing Outlet: 51MM
Compressor Housing Pipe Fitment: Push on (secured with hose clamp (not included))
Compressor Housing: Anti Surge
Speed Sensor Port: Yes
Vacuum Take Off: No
Turbine Wheel– Inconel 713C Turbine wheel/AISI4140 Forged Shaft (Rated 850 degrees centigrade)
Turbine Wheel Inducer: 60MM
Turbine Wheel Exducer: 55MM
Turbine Wheel Trim: 84
Maximimum Shaft Speed: 140,000RPM
Bearing Systems: Steel Ball Race inc dense heavy duty ceramic ball bearings.
Turbine Housing – 850 degrees centigrade rated SiMo Ductile Iron
Turbine Inlet: Various
Turbine Outlet: Various
Internal Wastegate: No
Oil Inlet: 7/16” 24TPI inc Inverted flare (restricted AN4 union included with inverted flare)
Oil Outlet: 38mm Bolt Centres (standard GT)
Water Ports: M14 x 1.5mm
Balanced: Fully Balanced (no further balancing required) certification supplied.
PHOTOS FOR ILLUSTRATION ONLY
WARNING:
Water cooling must be used to ensure reliability
Turbocharger oil pressure should not exceed 4.6bar
Maximum Turbine shaft speed must not exceeded