Windstorm 580 Turbocharger

(NOTE: CURRENT BUILD TIMES ARE TYPICALLY 5-7 WORKING DAYS)

Compressor Wheel– CNC Machined 2618 Billet Alloy (Rated 5 Bar (70psi)

Compressor Wheel  Inducer: 54MM

Compressor Wheel Exducer: 67MM

Compressor Wheel Trim:  65

Compressor Housing A/R: 72

Compressor Housing Inlet: 100MM

Compressor Housing Outlet: 51MM

Compressor Housing Pipe Fitment: Push on (secured with hose clamp (not included))

Compressor Housing: Anti Surge

Speed Sensor Port: Yes

Vacuum Take Off: No

Turbine Wheel– Inconel 713C Turbine wheel/AISI4140 Forged Shaft (Rated 850 degrees centigrade)

Turbine Wheel Inducer: 60MM

Turbine Wheel Exducer: 55MM

Turbine Wheel Trim: 84

Maximimum Shaft Speed: 140,000RPM

Bearing Systems: Steel Ball Race inc dense heavy duty ceramic ball bearings.

Turbine Housing – 850 degrees centigrade rated SiMo Ductile Iron

Turbine Inlet: Various

Turbine Outlet: Various

Internal Wastegate: Available with and without

Oil Inlet: 7/16” 24TPI inc Inverted flare (restricted AN4 union included with inverted flare)

Oil Outlet: 38mm Bolt Centres (standard GT)

Water Ports: M14 x 1.5mm

Balanced: Fully Balanced (no further balancing required) certification supplied.

PHOTOS FOR ILLUSTRATION ONLY

WARNING:

Water cooling must be used to ensure reliability

Turbocharger oil pressure should not exceed 4.6bar

Maximum Turbine shaft speed must not exceeded