Add To Your WishlistWind Devil 320 BHP (4647X/XR) - Dual Ceramic Ball Bearing Performance Turbocharger

Add To Your WishlistWind Devil 320 BHP (4647X/XR) - Dual Ceramic Ball Bearing Performance Turbocharger


Buy in the next
for estimated delivery on


Choose an option from the list above...


In stock

Sorry we're out of stock!

We can let you know when it's available again, just enter your email address below.


Click here to recommend this product to a friend

Wind Devil 320 BHP (4647X/XR) - Dual Ceramic Ball Bearing Performance Turbocharger



  • Description

    Wind Devil 320 Turbocharger

    (NOTE: CURRENT BUILD TIMES ARE TYPICALLY 5-7 WORKING DAYS)

     

    Compressor Wheel CNC Machined 2618 Billet Alloy (Rated 5 Bar (70psi)

    Compressor Wheel  Inducer: 46MM

    Compressor Wheel Exducer: 60MM

    Compressor Wheel Trim:  58

    Compressor Housing A/R: 60

    Compressor Housing Inlet: 76MM

    Compressor Housing Outlet: 51MM

    Compressor Housing Pipe Fitment: Push on (secured with hose clamp (not included))

    Compressor Housing: Anti Surge

    Speed Sensor Port: Yes

    Vacuum Take Off: No

    Turbine Wheel– Inconel 713C Turbine wheel/AISI4140 Forged Shaft (Rated 850 degrees centigrade)

    Turbine Wheel Inducer: 54MM

    Turbine Wheel Exducer: 47MM

    Turbine Wheel Trim: 76

    Maximimum Shaft Speed: 150,000RPM

    Bearing Systems: Steel Ball Race inc dense heavy duty ceramic ball bearings.

    Turbine Housing– 850 degrees centigrade rated SiMo Ductile Iron

    Turbine Inlet: T25 Style 4 Bolt

    Turbine Outlet: 0.64/0.86 A/R 5 Bolt

    Internal Wastegate: Yes

    Oil Inlet: 7/16” 24TPI inc Inverted flare (restricted AN4 union included with inverted flare)

    Oil Outlet: 38mm Bolt Centres (standard GT)

    Water Ports: M14 x 1.5mm

    Balanced: Fully Balanced (no further balancing required) certification supplied.

     PHOTOS FOR ILLUSTRATION ONLY

     

    WARNING:

    Water cooling must be used to ensure reliability

    Turbocharger oil pressure should not exceed 4.6bar

    Maximum Turbine shaft speed must not exceeded