Micro Burst 315 Turbocharger

(NOTE: CURRENT BUILD TIMES ARE TYPICALLY 5-7 WORKING DAYS)

Compressor Wheel - CNC Machined 2618 Billet Alloy (Rated 5 Bar (70psi)

Compressor Wheel  Inducer: 42MM

Compressor Wheel Exducer: 60MM

Compressor Wheel Trim:  50

Compressor Housing A/R: 50

Compressor Housing Inlet: 60MM

Compressor Housing Outlet: 50MM

Compressor Housing Pipe Fitment: Push on (secured with hose clamp (not included))

Compressor Housing: Standard (without anti surge)

Speed Sensor Port: No

Vacuum Take Off: Yes

Turbine Wheel – Inconel 713C Turbine wheel/AISI4140 Forged Shaft (Rated 850 degrees centigrade)

Turbine Wheel Inducer: 53MM

Turbine Wheel Exducer: 42MM

Turbine Wheel Trim: 62

Maximimum Shaft Speed: 150,000RPM

Bearing Systems: Steel Ball Race inc dense heavy duty ceramic ball bearings, Polymer cages (Metal available on request)

Turbine Housing – 850 degrees centigrade rated SiMo Ductile Iron

Turbine Inlet: T25 Style 4 Bolt

Turbine Outlet: 3" V Band

Internal Wastegate: Yes

Oil Inlet: 7/16” 24TPI inc Inverted flare (restricted AN4 union included with inverted flare)

Oil Outlet: 38mm Bolt Centres (standard GT)

Water Ports: M14 x 1.5mm

Balanced: Fully Balanced (no further balancing required) certification supplied.

 PHOTOS FOR ILLUSTRATION ONLY

WARNING:

Water cooling must be used to ensure reliability

Turbocharger oil pressure should not exceed 4.6bar

Maximum Turbine shaft speed must not exceeded