These cartridge-to-turbine-housing clamps are zinc-coated to prevent from rust.

Contents:

1 x Turbine Housing Clamp (includes fixing bolt and nut)

Specification: 

Torque Rating: 5NM 

Assembled Size: ø78.5mm

Flange Clamping Thickness: 10mm

Application:

For use on the Garrett GT14 Turbochargers (amongst others) with 78.5mm V Band Flange.

781504-0006

781504-0007

Chevrolet Cruze

Vauxhall Opel Astra

Vauxhall Opel Meriva

CORRECT TIGHTENING OF YOUR V BAND CLAMP

Correct fitting of a V-band clamp is vital for correct operation and to ensure you do not suffer premature failure.

 V-band clamps are NOT tightened excessively. They are designed to pinch the mating flanges together whilst allowing movement through expansion and vibration. Over tightening can damage clamps, flanges and in worst case pipe work. 

To mount your V-band clamp, butt mating flanges together and fit clamp. Tighten clamp to a torque setting of 3.5 Newton Metres (Nm). Then, using a rubber mallet, tap around the mating flanges to allow the joints to fully centre and sit without any unequal load. Then increase torque to its final torque setting of 5 Newton Metres (Nm)

Further tapping with a rubber mallet to removing any uneven load from the clamp or flange is beneficial whilst checking the torque setting stays at its rating of 5 Newton Metres (Nm).

Average dispatch: 24 Hours

**PHOTO FOR ILLUSTRATION PURPOSES ONLY**

THE USE OF MANUFACTURERS NAMES, PART NUMBERS AND SYMBOLS ARE FOR THE USE OF REFERENCING ONLY AND DO NOT IMPLY THE PART IS MADE BY THE SAID MANUFACTURER.

ALTHOUGH WE MAKE OUR GREATEST EFFORTS TO ENSURE ALL OUR TURBO PRODUCTS ARE DESCRIBED CORRECTLY INCLUDING FITMENT INFORMATION AND DIMENSIONAL REFERENCES, WE CANNOT GUARANTEE THESE TO BE CORRECT AS MISTAKES CAN HAPPEN. WE WILL NOT BE HELD FOR ANY DISCREPANCIES DISPLAYED.