Cyclone 1050 Turbocharger

(NOTE: CURRENT BUILD TIMES ARE TYPICALLY 5-7 WORKING DAYS)

Compressor Wheel – CNC Machined 2618 Billet Alloy (Rated 5 Bar (70psi)

Compressor Wheel  Inducer: 71MM

Compressor Wheel Exducer: 88MM

Compressor Wheel Trim:  65

Compressor Housing A/R: 0.8

Compressor Housing Inlet: 100MM

Compressor Housing Outlet: 75MM

Compressor Housing Pipe Fitment: Push on pipe secured with hose clip (not included)

Compressor Housing: Anti Surge

Speed Sensor Port: Yes

Vacuum Take Off: No

Turbine Wheel – Inconel 713C Turbine wheel/AISI4140 Forged Shaft (Rated 850 degrees centigrade)

Turbine Wheel Inducer: 77MM

Turbine Wheel Exducer: 70MM

Turbine Wheel Trim: 84

Maximimum Shaft Speed: 120,000RPM

Bearing Systems:Steel Ball Race inc dense heavy duty ceramic ball bearings.

Turbine Housing – 850 degrees centigrade rated SiMo Ductile Iron

Turbine Inlet: T4

Turbine Outlet: V-Band

Internal Wastegate: No

Oil Inlet: 38MM Centres

Oil Outlet: 50mm Bolt Centres

Water Ports: M14 x 1.5mm

Balanced: Fully Balanced (no further balancing required) certification supplied.

PHOTOS FOR ILLUSTRATION ONLY

WARNING:

Water cooling must be used to ensure reliability

Turbocharger oil pressure should not exceed 4.6bar

Maximum Turbine shaft speed must not exceeded